change creations conditions format

README.md

@@ -11,3 +11,221 @@ So I decided to create a script to manage my Proxmox homelab.
 # How to use it
 Have a look at the resources folder to see how to use it.
 
+
+# Documentation
+
+## Creation
+In the creation section, you have the option to define conditions for checking whether your LXC/VM has been previously configured.  
+If all of these conditions are met, the script will proceed directly to the deploy section and execute the necessary steps to update it. *(This indicates that your LXC/VM has already been configured, and we want to avoid erasing any existing settings/config.)*  
+However, if **any** of the conditions fail to match, the script will process to the creation steps section and execute **all** the commands again.  
+
+## Conditions
+### File
+The file condition will check if a file exists or not inside the LXC/VM.
+```json
+"conditions": {
+  "file": "/var/data/traefikv2/traefik.toml"
+    or
+  "files": ["/var/data/traefikv2/traefik.toml", "/var/data/config/traefikv2/docker-compose.yml"]
+}
+```
+It can be an array of file using ``["file1", "file2"]`` or just one file in double quote ``"file"``. 
+
+### Folder
+The folder condition will check if a folder exists or not inside the LXC/VM.
+```json
+"conditions": {
+  "folder": "/var/data/traefikv2"
+    or
+  "folders": ["/var/data/traefikv2", "/var/data/config/traefikv2"]
+}
+```
+It can be an array of folders using ``["folder1", "folder2"]`` or just one folder in double quote ``"file"``. 
+
+### Programs
+The programs condition will check if a program is installed or not in the LXC/VM.
+```json
+"conditions": {
+  "program": "docker"
+    or
+  "programs": ["docker", "docker-compose"]
+}
+```
+It can be an array of programs using ``["program1", "program2"]`` or just one program in double quote ``"program"``.
+
+*Note:This uses `which` to check if the program matches to anything*
+
+## Steps
+
+**Note: Paths**  
+When you have to specify a path, you can use ``/global/`` to use the global folder (`resources/<scripts|file>/`).  
+If nothing is specified, the script will use the VM/LXC folder (`resources/lxc/<id>/`).
+
+*The comments in the JSON below are only for documentation purposes and are not valid JSON, remove them before running.*
+### Script
+The script step will execute a script.
+```json
+"steps": [
+  {
+    "type": "script",
+    "path": "/global/install-docker.sh" # local path (here: resources/scripts/install-docker.sh)
+  }
+]
+```
+
+### File
+The file step will copy a file to the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "file",
+    "path": "traefik.toml", # local path (here: resources/lxc/<id>/traefik.toml)
+    "destination": "/var/data/traefikv2/traefik.toml" # lxc/vm path
+  }
+]
+```
+
+### Folder
+The folder step will copy a folder to the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "folder",
+    "path": "/data/", # local path (here: resources/lxc/<id>/data/)
+    "destination": "/var/data/traefikv2" # lxc/vm path
+  }
+]
+```
+
+### Command
+The command step will execute a command on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "command",
+    "command": "whoami", # command to execute
+    "working_directory": "/var/data/config/traefikv2" # lxc/vm path
+  }
+]
+```
+
+### Docker
+The docker step will execute a docker command on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "docker",
+    "command": "run -d --name=traefikv2 --restart=always -p 80:80 -p 443:443 -p 8080:8080 -v /var/data/traefikv2:/etc/traefik -v /var/data/config/traefikv2:/config -v /var/run/docker.sock:/var/run/docker.sock traefik:latest", # docker command to execute
+    "working_directory": "/var/data/config/traefikv2" # lxc/vm path
+  }
+]
+```
+
+### Docker-compose
+The docker-compose step will execute a docker-compose command on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "docker-compose",
+    "command": "up -d", # docker-compose command to execute
+    "working_directory": "/var/data/config/traefikv2" # lxc/vm path
+  }
+]
+```
+*Note : Here, why not use the `command` step? Docker Compose can sometimes be executed with `docker-compose` or `docker compose`, the script will take care of choosing the correct one.*
+
+### Git
+The git step will clone a git repo on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "git",
+    "url": "https://git.abc.xyz/abc/abc.git", # git url
+    "destination": "/root/" # lxc/vm path
+  }
+]
+```
+*Note: At the the moment, no authentication is supported, so only works on public repo.*
+
+### Download
+The download step will download a file on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "download",
+    "url": "https://git.abc.xyz/file.tar.gz", # download url
+        or
+    "urls": ["https://git.abc.xyz/file1.tar.gz", "https://git.abc.xyz/file2.tar.gz"] # download urls
+    "destination": "/tmp/" # lxc/vm path
+  }
+]
+```
+
+### Extract archive (tar/zip)
+The unzip step will unzip a file in the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "unzip",
+    "path": "/tmp/file.tar.gz", # lxc/vm path to the archive
+    "destination": "/var/data/config/traefikv2" # (optional) lxc/vm path to extract the archive, will use archive parent directory if blank
+  }
+]
+```
+*Note : At the the moment, only tar and zip are supported.*
+
+### Install package
+The install-package step will install a package on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "install-package",
+    "package": "git" # package to install
+        or
+    "packages": ["git", "docker"] # packages to install
+  }
+]
+```
+*Note : At the the moment, only apt, apk, dnf, yum are supported.*  
+*Warning : Packages can have different names depending on the Linux distribution.*
+
+### Remove package
+The remove-package step will remove a package on the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "remove-package",
+    "package": "git" # package to remove
+        or
+    "packages": ["git", "docker"] # packages to remove
+  }
+]
+```
+*Note : At the the moment, only apt, apk, dnf, yum are supported.*  
+*Warning : Packages can have different names depending on the Linux distribution.*
+
+### Reboot
+The reboot step will reboot the VM/LXC.
+```json
+"steps": [
+  {
+    "type": "reboot"
+  }
+]
+```
+
+### Replace in file
+The replace-in-file step will replace a string in a file.
+```json
+"steps": [
+  {
+    "type": "replace-in-file",
+    "path": "/var/data/config/traefikv2/traefik.toml", # lxc/vm path to the file
+        or
+    "paths": ["/var/data/config/traefikv2/traefik.toml", "/var/data/config/traefikv2/traefik2.toml"] # lxc/vm paths to the files
+    "search": "abc", # string to search
+    "replace": "xyz" # string to replace
+  }
+]
+```
+

resources/lxc/100/config.json

@@ -29,20 +29,18 @@
     "tags": "2-proxy+auth"
   },
   "creation": {
-    "conditions": [
-      {
-        "type": "program",
-        "program": "docker"
-      },
-      {
-        "type": "folder",
-        "path": "/var/data/traefik"
-      }
-    ],
-    "steps":[
+    "conditions": {
+      "programs": ["docker"],
+      "folders": ["/var/data/traefik", "/var/data/config/traefik"],
+      "files": ["/var/data/traefik/traefik.toml", "/var/data/config/traefikv2/docker-compose.yml"]
+    },
+    "steps": [
       {
         "type": "script",
         "path": "/global/install-docker.sh"
+      },
+      {
+        "type": ""
       }
     ]
   },

resources/lxc/100/data/config/traefikv2/docker-compose.yml

@@ -0,0 +1,40 @@
+version: "3"
+
+services:
+  app:
+    image: traefik:v2.9
+    env_file: /var/data/config/traefikv2/traefik.env
+    restart: always
+    ports:
+      - "80:80" # http
+      - "443:443" # https
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - /var/data/config/traefikv2/dyn:/dyn
+      - /var/data/config/traefikv2/traefik.toml:/etc/traefik/traefik.toml
+      - /var/data/traefik/traefik.log:/traefik.log
+      - /var/data/traefik/access.log:/access.log
+      - /var/data/traefik/acme.json:/acme.json
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.api.rule=Host(`traefik.xyz.abc`)"
+      - "traefik.http.routers.api.entrypoints=https"
+
+      - "traefik.http.routers.api.service=api@internal"
+      - "traefik.http.services.dummy.loadbalancer.server.port=9999"
+
+      - "traefik.http.routers.api.tls=true"
+      - "traefik.http.routers.api.tls.domains[0].main=xyz.abc"
+      - "traefik.http.routers.api.tls.domains[0].sans=*.xyz.abc"
+      - "traefik.http.routers.api.tls.certresolver=cloudflare"
+    networks:
+      - traefik_public
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "2m"
+        max-file: "2"
+
+networks:
+  traefik_public:
+    external: true

resources/lxc/100/data/config/traefikv2/traefik.env

@@ -0,0 +1,3 @@
+# CloudFlare example
+CLOUDFLARE_EMAIL=me@xyz.abc
+CLOUDFLARE_API_KEY=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

resources/lxc/100/data/config/traefikv2/traefik.toml

@@ -0,0 +1,52 @@
+[global]
+  checkNewVersion = true
+
+# Enable the Dashboard
+[api]
+  dashboard = true
+
+# Write out Traefik logs
+[log]
+  level = "INFO"
+  filePath = "/traefik.log"
+
+# [accessLog]
+#   filePath = "/access.log"
+
+[entryPoints.http]
+  address = ":80"
+  # Redirect to HTTPS (why wouldn't you?)
+  [entryPoints.http.http.redirections.entryPoint]
+    to = "https"
+    scheme = "https"
+
+  [entryPoints.http.forwardedHeaders]
+    trustedIPs = ["10.0.0.0/8", "172.16.0.0/16", "192.168.0.0/16", "fc00::/7"]
+
+[entryPoints.https]
+  address = ":443"
+  [entryPoints.https.http.tls]
+    certResolver = "cloudflare"
+
+  [entryPoints.https.forwardedHeaders]
+    trustedIPs = ["10.0.0.0/8", "172.16.0.0/16", "192.168.0.0/16", "fc00::/7"]
+
+
+# Cloudflare
+[certificatesResolvers.infomaniak.acme]
+  email = "me@xyz.abc"
+  storage = "acme.json"
+  [certificatesResolvers.infomaniak.acme.dnsChallenge]
+    provider = "cloudflare"
+    resolvers = ["1.1.1.1:53", "8.8.8.8:53"]
+
+# Docker Traefik provider
+[providers.docker]
+  endpoint = "unix:///var/run/docker.sock"
+  swarmMode = false
+  watch = true
+  exposedByDefault = false
+
+[providers.file]
+  directory = "/dyn"
+  watch = true

resources/lxc/100/data/traefikv2/acme.json

@@ -0,0 +1 @@
+{}

src/utils/creation_utils.py

@@ -19,15 +19,12 @@ def are_all_conditions_met(lxc):
 
     result = []
 
-    for condition in conditions:
-        if condition["type"] == "file":
-            result.append(Path(condition["path"]).is_file())
-        elif condition["type"] == "folder":
-            result.append(Path(condition["path"]).is_dir())
-        elif condition["type"] == "program":
-            result.append(lxc.run_command("which " + condition["program"], only_code=True) == 0)
-        else:
-            raise Exception(f"Unknown condition type {condition['type']}")
+    for file in conditions['files']:
+        result.append(Path(file).is_file())
+    for folder in conditions['folders']:
+        result.append(Path(folder).is_dir())
+    for program in conditions['programs']:
+        result.append(lxc.run_command("which " + program, only_code=True) == 0)
 
     if all(result):
         logging.info(f"All creations conditions met for LXC {lxc.lxc_id}, running deploy steps...")
@@ -44,14 +41,11 @@ def run_creations_steps(lxc):
     :param lxc: lxc
     :return: None
     """
-
     creation = lxc.get_creation()
     creation_steps = creation["creation_steps"]
 
     for step in creation_steps:
-        if step["type"] == "command":
-            lxc.run_command(step["command"])
-        elif step["type"] == "script":
-            lxc.run_script(step["script"])
-        else:
-            raise Exception(f"Unknown creation step type {step['type']}")
+        match step["type"]:
+            case "file":
+                if type(step["path"]) is list:
+                    pass