diff --git a/.github/wiki/script-auto-config-linux.sh b/.github/wiki/script-auto-config-linux.sh
new file mode 100644
index 0000000..fa9879e
--- /dev/null
+++ b/.github/wiki/script-auto-config-linux.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Enable SSH Server
+if command -v systemctl &> /dev/null; then
+    sudo systemctl enable --now sshd
+else
+    echo "Systemctl not found. Please enable SSH manually."
+fi
+
+# Configure sudoers
+echo "Configuring sudoers..."
+echo -e "\n# Allow your user to execute specific commands without a password" | sudo tee -a /etc/sudoers
+echo "$(whoami) ALL=(ALL) NOPASSWD: /sbin/shutdown, /sbin/init, /usr/bin/systemctl, /usr/sbin/pm-suspend, /usr/bin/awk, /usr/sbin/grub-reboot, /usr/sbin/grub2-reboot" | sudo tee -a /etc/sudoers
+
+# Firewall Configuration
+if command -v ufw &> /dev/null; then
+    echo "Configuring firewall..."
+    sudo ufw allow 22
+else
+    echo "UFW not found. Please configure the firewall manually."
+fi
+
+echo "You can now add your computer to HomeAssistant."
diff --git a/.github/wiki/script-auto-config-windows.ps1 b/.github/wiki/script-auto-config-windows.ps1
new file mode 100644
index 0000000..afb163f
--- /dev/null
+++ b/.github/wiki/script-auto-config-windows.ps1
@@ -0,0 +1,30 @@
+# Install OpenSSH Components
+Write-Host "Installing OpenSSH Components..."
+
+# Check if OpenSSH is installed
+$opensshInstalled = Get-WindowsOptionalFeature -Online | Where-Object FeatureName -eq "OpenSSH.Client"
+$opensshServerInstalled = Get-WindowsOptionalFeature -Online | Where-Object FeatureName -eq "OpenSSH.Server"
+
+# Install OpenSSH Client and Server if not installed
+if (!$opensshInstalled) {
+    Write-Host "Installing OpenSSH Client..."
+    Add-WindowsCapability -Online -Name OpenSSH.Client
+}
+
+if (!$opensshServerInstalled) {
+    Write-Host "Installing OpenSSH Server..."
+    Add-WindowsCapability -Online -Name OpenSSH.Server
+}
+
+# Start and set OpenSSH Server to Automatic
+Write-Host "Configuring OpenSSH Server..."
+Set-Service -Name sshd -StartupType Automatic
+Start-Service sshd
+
+# Confirm the Firewall rule is configured. It should be created automatically by setup. Run the following to verify
+if (!(Get-NetFirewallRule -Name "OpenSSH-Server-In-TCP" -ErrorAction SilentlyContinue | Select-Object Name, Enabled)) {
+    Write-Output "Firewall Rule 'OpenSSH-Server-In-TCP' does not exist, creating it..."
+    New-NetFirewallRule -Name 'OpenSSH-Server-In-TCP' -DisplayName 'OpenSSH Server (sshd)' -Enabled True -Direction Inbound -Protocol TCP -Action Allow -LocalPort 22
+} else {
+    Write-Output "Firewall rule 'OpenSSH-Server-In-TCP' has been created and exists."
+}
\ No newline at end of file
diff --git a/.images/example1.png b/.images/example1.png
index ef2c5c5..692ca82 100644
Binary files a/.images/example1.png and b/.images/example1.png differ
diff --git a/HOWTO.md b/HOWTO.md
deleted file mode 100644
index 555d932..0000000
--- a/HOWTO.md
+++ /dev/null
@@ -1,148 +0,0 @@
-# Quick documentation
-
-## `send_magic_packet`
-
-### Description
-
-Send a 'magic packet' to wake up a device with 'Wake-On-LAN' capabilities.
-
-### Fields
-
-- `mac`
-    - **Name:** MAC address
-    - **Description:** MAC address of the device to wake up.
-    - **Required:** true
-    - **Example:** "aa:bb:cc:dd:ee:ff"
-    - **Input:** text
-
-- `broadcast_address`
-    - **Name:** Broadcast address
-    - **Description:** Broadcast IP where to send the magic packet.
-    - **Example:** 192.168.255.255
-    - **Input:** text
-
-- `broadcast_port`
-    - **Name:** Broadcast port
-    - **Description:** Port where to send the magic packet.
-    - **Default:** 9
-    - **Input:** number
-        - **Min:** 1
-        - **Max:** 65535
-
-## `restart_to_windows_from_linux`
-
-### Description
-
-Restart the computer to Windows when running Linux using Grub.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-## `restart_to_linux_from_windows`
-
-### Description
-
-Restart the computer to Linux when running Windows.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-## `start_computer_to_windows`
-
-### Description
-
-Start the computer directly to Windows (boots to Linux, set grub reboot, then boots to Windows).
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-## `put_computer_to_sleep`
-
-### Description
-
-Put the computer to sleep.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-## `restart_computer`
-
-### Description
-
-Restart the computer.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-## `change_monitors_config`
-
-### Description
-
-Change monitors config.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-### Fields
-
-- `monitors_config`
-    - **Name:** Monitors config
-    - **Description:** Monitors config.
-    - **Required:** true
-        - **Selector:** object (yaml)
-            - **Example:**
-              ```yaml
-              # Tip: You can use the command `gnome-monitor-config list` or `xrandr` to your monitors names and resolutions.
-              HDMI-1:
-                enabled: true
-                primary: true
-                position: [ 0, 0 ]
-                mode: 3840x2160@120.000
-                transform: normal
-                scale: 2
-              ```
-
-            - **Example for Node-RED(JSON):**
-              ```json
-              // Example of the data expression of a service call node in Node-RED.
-              {
-                "monitors_config": {
-                  "HDMI-1": {
-                    "enabled": true,
-                    "primary": true,
-                    "position": [0, 0],
-                    "mode": "3840x2160@120.000",
-                    "transform": "normal",
-                    "scale": 2
-                  }
-                }
-              }
-              ```
-
-## `steam_big_picture`
-
-### Description
-
-Start/stop Steam in Big Picture mode or go back to Steam desktop UI.
-
-### Target
-
-- **Device Integration:** easy_computer_manage
-
-### Fields
-
-- `action`
-    - **Name:** Action
-    - **Description:** Action to perform.
-    - **Required:** true
-    - **Selector:** select
-    - **Options:**
-        - **start**: Start Steam in Big Picture mode.
-        - **stop**: Stop Steam in Big Picture mode.
-        - **exit**: Go back to Steam desktop UI.
\ No newline at end of file
diff --git a/README.md b/README.md
deleted file mode 100644
index 5f59400..0000000
--- a/README.md
+++ /dev/null
@@ -1,69 +0,0 @@
-# 🖧 Easy Computer Manager
-
-[![hacs_badge](https://img.shields.io/badge/HACS-Custom-41BDF5.svg?style=for-the-badge)](https://github.com/hacs/integration)
-
-![img.png](.images/example1.png)
-
-## 🐧 Configure Linux-running computer to be managed by Home Assistant.
-
-### Enable the SSH server
-
-Make sure to have a working SSH-server on your computer. I have only tested this integration with OpenSSH but YMMV.
-
-On most system it can be enabled with the following commands :
-
-```bash
-sudo systemctl enable --now sshd
-```
-
-### Configure sudoers
-
-We need to allow your user account to run specific sudo command without asking for the password so HomeAssistant can run
-them.  
-To do this, we need to edit sudoers file, run the following command ``visudo`` in a terminal and append the following
-the to end of the file :
-
-```
-# Allow your user user to execute shutdown, init, systemctl, pm-suspend, awk, grub-reboot, and grub2-reboot without a password
-username ALL=(ALL) NOPASSWD: /sbin/shutdown, /sbin/init, /usr/bin/systemctl, /usr/sbin/pm-suspend, /usr/bin/awk, /usr/sbin/grub-reboot, /usr/sbin/grub2-reboot
-```
-
-*Note : It might be necessary to allow port 22 (ssh) in your firewall.*
-
-**⚠️ Be sure to replace username with your username.**
-
-## 🪟 Configure Windows-running computer to be managed by Home Assistant.
-
-To install the OpenSSH components:
-
-1. Open Settings, select Apps, then select Optional Features.
-2. Scan the list to see if the OpenSSH is already installed. If not, at the top of the page, select Add a feature,
-   then:  
-   Find OpenSSH Client, then select Install (optional)  
-   Find OpenSSH Server, then select Install
-3. Once setup completes, return to Apps and Optional Features and confirm OpenSSH is listed.
-4. Open the Services desktop app. (Select Start, type services.msc in the search box, and then select the Service app or
-   press ENTER.)
-5. In the details pane, double-click OpenSSH SSH Server.
-6. On the General tab, from the Startup type drop-down menu, select Automatic.
-7. To start the service, select Start.
-
-*Instructions
-from [Microsoft](https://learn.microsoft.com/en-us/windows-server/administration/openssh/openssh_install_firstuse)*
-
-*Note : It might be necessary to allow port 22 (ssh) in the Windows firewall altough it should be done automatically if
-following the instructions from above.*
-
-## 🖧 Configure dual-boot (Windows/Linux) computer to be managed by Home Assistant.
-
-To configure dual-boot computer, you need to configure both Windows and Linux, for this look at the 2 sections above.  
-You will need to have the same username and password on both Windows and Linux.
-
-*Note : Be sure to enable the checkbox "Dual boot system" when adding your PC to home assistant.*
-
-## 🔑 Why not use SSH keys?
-
-Well, simply because it would require the user to do some extra steps. Using the password, it's almost plug and play but
-compromise the security a bit.  
-_In the future, the option to use SSH keys might be added depending on user feedback._
-